Skip to main content
Went to look at the car yesterday ... first impression pulling up is it's not really the color I wanted... but close enough.... then I was impressed with the shine which the car never had... but then I started to see all the little flaws... I rationalized in my mind that this was a cheap paint job, but then I noticed that the front quarter pannel that was "fixed" was way off from the other side... The idiot didn't bother to match but just repaired it to the shape of the bent out one... WTF.... so many little things wrong with the paint I can't mention... also the antenna wasn't removed... the rear break light wasn't removed...The wheels and tires were over sprayed... Calvin is going to send the car back but I'm hesitant.... I dont know what to do at this point.... windshield looks good...

When my car was at the other shop I was always stressed about the cost but not the quality of work... with Calvin now I'm stressed about the Quality and not the cost... I'm just feeling really down right now...

Oh yeah... the seat belts I bought are broken....

Comments

Popular posts from this blog

Charles 4AGZE Blueprint Sheet Crankshaft Actual  Mains 1  1.889"  47.98 mm 2  1.889"  47.98 mm 3  1.889"  47.98 mm 4  1.889"  47.98 mm 5  1.889"  47.98 mm Rods 1  1.653"  41.98 mm 2  1.653"  41.98 mm 3  1.653"  41.98 mm 4  1.653"  41.98 mm Piston Diameters  3.206 "  82.8 mm Balance Weights in grams Pistons 310 Piston Pins  101 Piston Rings  19 Rods  411 Piston to wall clearance 1 .0045" 2 .0045" 3 .0040" 4 .0045" Main Bearing clearance 1-3 .0025" 4&5 .002" Rod Bearing clearance 1-3 .002" 4 .0018" Piston pin clearance 1-4 .001" Piston ring end gap Top .021" Second .024" Crankshaft endplay .002" Combustion chambers  1-4   39cc Valve clearance Intake  ...
 drove car today... vacuum leak fixed a lot including the need to wait under 2,000 rpm to disengage gear so it doesn't idle high... That fuck'n Linh mechanic is worthless...  anyways... also no problems getting into gear... except for one new issue... 1st gear is a little hard to get into ???? replaced the 2nd shift cable to OEM, didnt fix the problem but Im happier having OEM then MR2 Heaven... also changed transmission fluid...